AI-generated · cited to primary sources · not investment advice · How we research
Our verdict on Deere & Company isn’t the consensus take — see where we landed, and the one risk the bull case glosses over.
See the verdict — free →This filing reports Q1 FY2026 cash flows and gives a FY2026 outlook, but does not provide the FY2025 equipment-operations operating cash flow actual needed to assess the earlier forecast. (1 not yet due, 3 in progress across 4 tracked commitments)
“We are forecasting operating cash flows from equipment operations in 2026 to remain flat compared with 2025 driven by an offsetting decrease in net income adjusted for non-cash provisions, and higher cash flows generated from higher accounts payable and accrued expenses and inventory reductions.”
The filing gives Q1 FY2026 capital expenditure information and a FY2026 estimate, but does not state FY2025 actual capital expenditures against the earlier estimate. (2 not yet due, 1 in progress, 1 revised across 4 tracked commitments)
“Capital expenditures in 2026 are estimated to be approximately $1,400.”
The supplied sources do not provide substantive findings on recent management changes or controversies, analyst assessments of management quality, industry awards, corporate-governance ratings, related-party transactions, or insider trading and pledging. The Zacks article excerpt is an industry outlook, not an assessment of Deere management quality. Short interest of 1.94% of float is a market statistic, not evidence of insider activity.
“The supplied sources do not provide substantive findings on recent management changes or controversies, analyst assessments of management quality, industry awards, corporate-governance ratings, related-party transactions, or insider trading and pledging. The Zacks article excerpt is an industry outlook, not an assessment of Deere management quality. Short interest of 1.94% of float is a market statistic, not evidence of insider activity.”
Deere's multi-year Leap Ambitions guide implementation of its Smart Industrial Operating Model and emphasize differentiated equipment and service solutions, including automation, autonomy, digitalization, lifecycle solutions, and Solutions as a Service. (+4 more commitments)
“Our Leap Ambitions, a set of focused goals designed to guide the implementation of our Smart Industrial Operating Model, feature multi-year financial and operational goals, emphasizing the use of our differentiated equipment and service solutions, including automation, autonomy, digitalization, lifecycle solutions, and Solutions as a Service (SaaS).”
Deere has agreed to provide repair resources to farmers and independent repair providers on fair and reasonable terms and to report regularly to, and remain subject to oversight by, the FTC regarding compliance.
“On July 8, 2026, we entered into a settlement with the FTC and plaintiff states to resolve all claims contained in the lawsuit. As part of that settlement, we have agreed, among other items, to provide certain repair resources to farmers and independent repair providers on “fair and reasonable terms” (as defined by the settlement). We have also agreed to provide regular reporting to the FTC and submit to the FTC’s oversight of our compliance with the settlement.”
See the full cited Management analysis of Deere & Company
External sales expanded 24.0% from Q1 FY25 to Q1 FY26, and operating profit increased 58.1%; margin improved from 7.1% to 9.0%. Growth was driven mainly by higher shipments in the U.S., Canada, Europe, and India and stronger pricing. Management expects U.S. and Canadian sales to be flat to slightly higher for FY26. (5 expanding across 4 engines)
“Total segment net sales and revenues 4,105 ... Segment operating profit $ 527”
SAT’s share of total segment revenue was about 24.0% in FY25 versus 27% in Q3 FY26, and its operating margin rose from 11.8% to 18.1%. The latest quarter’s 12% external-sales growth indicates expansion in the most recent trajectory, despite FY25 full-year sales having declined 7% year over year. (2 expanding, 1 contracting)
“Net sales $10,224 ... Operating profit 1,207 ... Operating margin 11.8%.”
The FY25 filing describes approximately 2,050 independent dealer locations in the U.S. and Canada, with additional retail outlets for selected products. The Q3 FY26 baseline continues to characterize the dealer network as a broad sales-and-service channel, but gives no new comparable coverage figure; no measurable moat change is established. (1 stable)
“The products and services produced by the segments above are primarily marketed through independent retail dealer networks and major retail outlets.”
FY25 technology and SaaS revenue remained a small, non-significant portion of company revenue, and the filing noted slower-than-expected adoption of some precision and subscription offerings. The Q3 FY26 baseline still characterizes technology as a credible advantage but says recurring subscription monetization remains limited; no material change in moat strength is evidenced. (2 stable)
“Our Leap Ambitions, a set of focused goals designed to guide the implementation of our Smart Industrial Operating Model, feature multi-year financial and operational goals, emphasizing the use of our differentiated equipment and service solutions, including automation, autonomy, digitalization, lifecycle solutions, and Solutions as a Service (SaaS). Deeper integration of technology into equipment to enable customers to do more with less remains a persistent market trend. Customers seek to improve profitability, productivity, and sustainability by selecting our equipment and technology solutions. While we continue to benefit from the adoption of these technologies, revenue from SaaS products did not represent a significant percentage of our revenues in the periods presented.”
The U.S. represented about 52.5% of FY25 company revenue, compared with 54.1% in Q3 FY26. The latest reported U.S. revenue was $6,814 million. Because one value is full-year and the other is a quarter, this suggests a modest share increase but is not a like-for-like period comparison. (1 expanding, 1 contracting)
“United States $ 1,737 $ 1,906 $ 2,132 $ 1,039 $ 6,814”
See the full cited Business Model analysis of Deere & Company
Customer prepayments and deferred revenue for a mix of items—including extended warranties, future equipment sales, and technology subscriptions and services—rose to $2.100 billion from $1.923 billion at FY24 year-end and $1.895 billion a year earlier. This indicates a larger pool of customer advances, but it is not a standalone software backlog, and Deere says Solutions as a Service remains an insignificant share of revenue. Growth signal: steady-to-positive in the reported deferred-payment balance, but early adoption and monetization remain unproven. The company does not quantify the addressable market in dollars. (1 accelerating, 4 steady across 5 signals, 1 leading indicator)
“These relate to extended warranty premiums, advance payments for future equipment sales, and subscription and service revenue related to precision guidance, telematic services, and other information enabled solutions. These advanced customer payments are presented as deferred revenue ... The deferred revenue received, but not recognized in revenue, was $2,120, $2,039, and $2,100 at August 2, 2026, November 2, 2025, and July 27, 2025, respectively.”
The current filing reports Q1 FY26 sales of $2.670 billion, up 34% year over year, compared with the previously extracted Q3 FY26 growth of 18%. The latest reported growth rate is higher, so the most recent signal points to acceleration, although the periods are not consecutive and the filing does not provide a comparable first-nine-month figure here. (3 accelerating, 2 reversing across 5 signals)
“Construction & Forestry sales increased for the quarter primarily as a result of higher shipment volumes (primarily in the U.S.) and favorable price realization. ... Industry sales in the U.S. and Canada for construction and compact construction equipment are projected to be higher compared to 2025. Favorable industry fundamentals are supported by infrastructure, data center, and energy-related projects, as well as continued investment in rental fleets.”
The earlier extracted signal said R&D spending was growing, but this filing shows it edging down: $556 million in Q3 versus $567 million a year earlier (-2%), and $1.631 billion for the first nine months versus $1.664 billion (-2%). Management says spending is largely unchanged as it continues developing and incorporating technology solutions. This is not evidence of expanding investment or a quantified product-revenue opportunity. (1 reversing, 1 accelerating, 1 steady across 3 signals, 1 leading indicator)
“Research and development expenses ... 567 ... 556 ... +2 ... 1,704 ... 1,631 ... +4. Increased due to continued focus on developing and deploying technology solutions.”
Deere’s Tenna acquisition adds construction technology for tracking equipment and managing mixed-brand fleets. The $439 million purchase expands the product offering, but the filing does not disclose a sales target, customer-growth target, or expected financial contribution.
“In 2026, the company completed several acquisitions to advance the capabilities of its existing technology offerings, including the February acquisition of Tenna LLC (Tenna) a U.S. construction technology company that provides mixed-fleet equipment operations and asset tracking solutions. Tenna was acquired for a purchase price of $439, net of $1 cash acquired ... Tenna was assigned to the CF segment.”
Both margins improved year over year in Q1 FY26: Construction & Forestry rose to 5.1% from 3.3%, and Small Agriculture & Turf rose to 9.0% from 7.1%. The previously extracted Q3 FY26 margins were substantially higher at 12.1% and 18.4%, respectively, but the periods are not consecutive and operating mix may differ. The filing attributes Q1 profit improvement to higher shipments and, for Construction & Forestry, factory efficiency, partly offset by tariffs. (2 accelerating, 3 reversing across 5 signals)
“Small Agriculture & Turf ... Operating margin 18.4% 16.0% ... Operating profit increased due to higher shipment volumes / sales mix and favorable price realization, partially offset by higher production costs from increased material costs.”
See the full cited Future Growth analysis of Deere & Company
The business relies on independent dealers to sell and service equipment and precision technologies. If dealers mismanage new or used inventory, fail to execute sales plans, or cannot support technology services, Deere could see weaker sales, more incentives, or damage to customer relationships. This is a distribution-channel execution risk; the report does not name specific dealer failures. [EXECUTION]
“our dealer network’s development and implementation of successful sales plans, management of new and used inventory, distribution of our products, and support and service for our precision technology solutions”
Credit quality weakened in FY2025. The allowance for financing-receivable losses increased from $229 million to $258 million, and its share of the portfolio rose from 0.43% to 0.50%; non-performing receivables increased from 1.01% to 1.23%. Management also reported higher delinquencies and expected losses among agriculture and turf customers. The later baseline reports $244 million of write-offs in the first nine months of FY2026, but does not provide directly comparable prior-period write-offs or allowance coverage in the supplied baseline summary. This risk was worsening in FY2025 and remains material, but its subsequent trajectory is not measurable from the available comparison. (3 insufficient_data, 1 intensifying, 1 easing)
“The allowance for credit losses on retail notes and financing lease receivables remained relatively flat in the third quarter of 2026 and increased slightly in the first nine months of 2026, due to higher expected losses on construction retail accounts. ... In 2026, we may experience the following effects due to unfavorable large agriculture market conditions: lower sales volumes, higher sales incentives, and elevated receivable write-offs.”
The technology monetization risk was still present in FY2025: management said SaaS revenue was not a significant share of revenue, and disclosed slower-than-expected adoption of some precision technology and subscription services. The filing also notes growing competition from established equipment makers and technology-focused companies. The August 2026 baseline likewise says software subscriptions remained an insignificant share of revenue, with no evidence of a material change in adoption or monetization. The risk therefore appears stable at a medium level rather than newly worsening. (2 stable, 2 insufficient_data)
“Deeper integration of technology into equipment to enable customers to do more with less remains a persistent market trend. Customers seek to improve profitability, productivity, and sustainability by selecting our equipment and technology solutions. While we continue to benefit from the adoption of these technologies, revenue from SaaS products did not represent a significant percentage of our revenues in the periods presented.”
The supplied two-year share-price data show a strong total return of 75.15%, but also a reported standard deviation of $77.64 in closing prices. The return is not evidence that operating or balance-sheet risks have fallen, and the price volatility means adverse earnings or policy news could still prompt a sharp market reassessment.
“The supplied two-year share-price data show a strong total return of 75.15%, but also a reported standard deviation of $77.64 in closing prices. The return is not evidence that operating or balance-sheet risks have fallen, and the price volatility means adverse earnings or policy news could still prompt a sharp market reassessment.”
Tariff costs were a significant, quantified headwind in this quarter: Deere reported $361 million of direct incremental tariffs before supplier and demand effects, and attributed $272 million of the year-over-year net-income decline to tariffs. The consolidated cost-of-sales ratio worsened to 78.5% from 74.0%, while PPA, SAT, and CF all cited tariffs as a partial or primary operating-profit pressure. The Aug baseline later reports $502 million of direct tariff impact net of recoveries over nine months, so the longer-period cumulative burden was higher than this first-quarter figure, although the measurement bases differ. (1 intensifying, 1 stable)
“The direct impact of incremental tariffs incurred by us was $361 in the first quarter of 2026, excluding the impact of tariffs on our suppliers and market demand.”
See the full cited Risk analysis of Deere & Company
AI-generated informational research only. ThesisLoop is not investment advice, a stock recommendation, or a guarantee of returns.